The Vartech V 6250 B is CIE's authorised-distributor digital anemometer - a single model covering air speed and air temperature simultaneously, built for HVAC and general airflow measurement work. Since there's one model rather than a range, this guide covers what its specification actually means for your application rather than a model comparison.
Air Speed and Temperature Range
The V 6250 B measures air speed from 0-45 m/s (0-140 km/h) and air temperature from 0-45 °C simultaneously on the same display - a genuine convenience over a speed-only instrument, since airflow measurements (particularly for HVAC commissioning) are frequently interpreted alongside temperature. Before specifying any anemometer, check your actual expected air speed range against the instrument's range - 0-45 m/s comfortably covers duct velocities, room air movement, and most general ventilation checks, but confirm it against your specific application if you're working with unusually high-velocity industrial exhaust or process airflow.
Wind Chill and the Analog Bar Graph
The instrument computes and displays wind chill temperature alongside the raw readings - relevant for outdoor and building-envelope airflow assessment where the combined effect of air speed and temperature on perceived conditions matters, not just the raw air speed number. A real-time analog bar graph runs alongside the digital reading, letting you read a fluctuating airflow's trend at a glance rather than watching digits change - genuinely useful when you're hunting for a draft source or checking for a stable reading during commissioning.
Avg/Min/Max hold for commissioning work
Where This Instrument Fits
The V 6250 B suits HVAC commissioning, ventilation system testing, industrial airflow assessment, and general environmental monitoring - anywhere a technician needs a quick, reliable air speed and temperature reading with Data Hold and Auto Power Off for practical field use. Its large backlit LCD is built for readability in typical field conditions - plant rooms, duct access points, and similar working environments rather than a laboratory bench.
Quick Reference
- HVAC commissioning and duct velocity checks: V 6250 B's 0-45 m/s range and Avg/Min/Max hold cover this directly.
- Draft-hunting / trend reading: use the real-time analog bar graph rather than watching the digital display alone.
- Outdoor / building-envelope assessment: the wind-chill computation gives a more representative "felt" reading than raw air speed alone.
- Unusually high-velocity industrial process airflow: confirm your expected range against the instrument's 0-45 m/s ceiling before specifying.
CIE Instruments is an authorised distributor for the Vartech V 6250 B digital anemometer. See our general guide on anemometers, or contact us to confirm it matches your application.